metal fabrication company for small project help

Do you enjoy working with metal? Are there some projects that you have planned in your head, but cannot figure out how to create? I was working with my son to build him a small go-cart that we had designed on paper, but couldn't figure out how to shape the body the way that he wanted it to look. After days of brainstorming and several sheets of metal wasted, I decided to take the problem to the professional metal fabrication company near my house. What I learned really opened my eyes to some of the mistakes that my son and I were making. To learn how a metal fabrication company can help you with your projects, visit my site.

The Pros And Cons Of Using A Microjet Laser For Laser Cutting


Laser cutting is one of the best ways to cut items like steel, aluminum, and titanium. The laser can make sharp, precise cuts using a machine. This is more accurate than other methods that involve cutting by hand. If you are looking to have laser cutting done for a metal item you are manufacturing or producing, you will learn that there are three primary laser cutting methods. This includes fiber lasers, CO2 lasers and Microjet lasers, also called water lasers. Learning the pros and cons of each type of laser will help you decide which is best for your project. Here are a couple of the pros and cons of Microjet lasers for laser cutting.

The Cons of Using a Microjet Laser for Laser Cutting

  • A Microjet Laser Can Be More Expensive Than a CO2 Laser

One of the biggest downsides to a microject laser for laser cutting is that this type of laser is typically more expensive than a standard CO2 laser. If you are looking to buy the laser cutting device and cut the items yourself, and budget is a key factor in your decision, a microject laser may not be the best option for you.

  • The Metal Item Must Be Dried to Prevent Rust

The other downside to using a microjet laser is that you need to properly dry all of the metal items you are cutting after you are finished when using a microjet laser. This is because this type of laser uses water to make cuts. Unfortunately, water can cause rust to form on untreated metal. Drying each and every item you cut can be time consuming, so this is something to keep in mind if you have a small crew or a tight timeline.

The Pros of Using a Microject Laser for Laser Cutting

  • Water Helps to Control Dust and Fumes

The biggest advantage to using a microject laser for metal laser cutting is that the water used helps to control dust and fumes. Dry cutting metal can cause metal fumes and shavings to fly everywhere. The smells can be awful and the particles floating in the air can make it hard to breathe. Water helps to minimize the fumes and dust, making your work space easier to work and breathe in.

  • Water Helps to Control the Laser's Temperature

The other major benefit to using a microject laser for laser cutting is that the water helps to control the laser's temperature, which in turn, helps to control the metal's temperature. Some items made from certain metals, such as aluminum, are susceptible to damage at high levels of heat. If the metal heats up, it can bend or even melt. Controlling the temperature of the laser and metal is important when working with these thin metals so you do not damage the metal item you are trying to cut.

Deciding which metal cutting method to use can be a big decision. However, taking the time to learn the pros and cons of various metal laser cutting methods will help you hone in on the laser type that is right for your needs. For more information, visit a company like J&E Metal Fabricators Inc.


25 May 2017